Discussion:
[asterisk-users] corosync and Asterisk 13
Ryan, Travis
2017-07-19 13:46:42 UTC
Permalink
I want to use corosync and installed it via ubuntu repository. I guess there is a version 1 and 2 of corosync. For some reason ./configure for Asterisk (13) isn't recognizing I have corosync installed. I can't enable the res_corosync module in menuselect.

Any ideas?

Thanks!

Travis
Marcelo Terres
2017-07-19 14:05:13 UTC
Permalink
Did you installed the dev package? corosync-dev



Marcelo H. Terres <***@gmail.com>
IM: ***@jabber.mundoopensource.com.br
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres
Post by Ryan, Travis
I want to use corosync and installed it via ubuntu repository. I guess
there is a version 1 and 2 of corosync. For some reason ./configure for
Asterisk (13) isn’t recognizing I have corosync installed. I can’t enable
the res_corosync module in menuselect.
Any ideas?
Thanks!
Travis
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.
org/
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
http://lists.digium.com/mailman/listinfo/asterisk-users
Ryan, Travis
2017-07-19 14:12:37 UTC
Permalink
yessir

From: asterisk-users-***@lists.digium.com [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Marcelo Terres
Sent: Wednesday, July 19, 2017 10:05 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com>
Subject: Re: [asterisk-users] corosync and Asterisk 13

Did you installed the dev package?
corosync-dev



Marcelo H. Terres <***@gmail.com<mailto:***@gmail.com>>
IM: ***@jabber.mundoopensource.com.br<mailto:***@jabber.mundoopensource.com.br>
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres

On 19 July 2017 at 14:46, Ryan, Travis <***@oscarwinski.com<mailto:***@oscarwinski.com>> wrote:
I want to use corosync and installed it via ubuntu repository. I guess there is a version 1 and 2 of corosync. For some reason ./configure for Asterisk (13) isn’t recognizing I have corosync installed. I can’t enable the res_corosync module in menuselect.

Any ideas?

Thanks!

Travis
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Ryan, Travis
2017-07-19 17:12:57 UTC
Permalink
Anyone else using corosync with Asterisk 13 and Ubuntu 16.04 or higher?

From: asterisk-users-***@lists.digium.com [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Ryan, Travis
Sent: Wednesday, July 19, 2017 10:13 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com>
Subject: Re: [asterisk-users] corosync and Asterisk 13

yessir

From: asterisk-users-***@lists.digium.com<mailto:asterisk-users-***@lists.digium.com> [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Marcelo Terres
Sent: Wednesday, July 19, 2017 10:05 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com<mailto:asterisk-***@lists.digium.com>>
Subject: Re: [asterisk-users] corosync and Asterisk 13

Did you installed the dev package?
corosync-dev



Marcelo H. Terres <***@gmail.com<mailto:***@gmail.com>>
IM: ***@jabber.mundoopensource.com.br<mailto:***@jabber.mundoopensource.com.br>
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres

On 19 July 2017 at 14:46, Ryan, Travis <***@oscarwinski.com<mailto:***@oscarwinski.com>> wrote:
I want to use corosync and installed it via ubuntu repository. I guess there is a version 1 and 2 of corosync. For some reason ./configure for Asterisk (13) isn’t recognizing I have corosync installed. I can’t enable the res_corosync module in menuselect.

Any ideas?

Thanks!

Travis
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Ryan, Travis
2017-07-19 19:26:22 UTC
Permalink
I have an 14.04 server with Asterisk 13.5 that will recognize it. It has corosync and corosync-dev version 2.3.3 on it.

The one I can’t get to recognize it is 16.04 ubuntu, with corosync and -dev version 2.3.5. Won’t be recognized by ./configure for Asterisk 13.17, 13.16, or Asterisk Certified 13.13.

I REALLY need some help figuring this out. 😊

Thanks!

From: asterisk-users-***@lists.digium.com [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Ryan, Travis
Sent: Wednesday, July 19, 2017 1:13 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com>
Subject: Re: [asterisk-users] corosync and Asterisk 13

Anyone else using corosync with Asterisk 13 and Ubuntu 16.04 or higher?

From: asterisk-users-***@lists.digium.com<mailto:asterisk-users-***@lists.digium.com> [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Ryan, Travis
Sent: Wednesday, July 19, 2017 10:13 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com<mailto:asterisk-***@lists.digium.com>>
Subject: Re: [asterisk-users] corosync and Asterisk 13

yessir

From: asterisk-users-***@lists.digium.com<mailto:asterisk-users-***@lists.digium.com> [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Marcelo Terres
Sent: Wednesday, July 19, 2017 10:05 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com<mailto:asterisk-***@lists.digium.com>>
Subject: Re: [asterisk-users] corosync and Asterisk 13

Did you installed the dev package?
corosync-dev



Marcelo H. Terres <***@gmail.com<mailto:***@gmail.com>>
IM: ***@jabber.mundoopensource.com.br<mailto:***@jabber.mundoopensource.com.br>
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres

On 19 July 2017 at 14:46, Ryan, Travis <***@oscarwinski.com<mailto:***@oscarwinski.com>> wrote:
I want to use corosync and installed it via ubuntu repository. I guess there is a version 1 and 2 of corosync. For some reason ./configure for Asterisk (13) isn’t recognizing I have corosync installed. I can’t enable the res_corosync module in menuselect.

Any ideas?

Thanks!

Travis
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Ryan, Travis
2017-07-20 01:29:48 UTC
Permalink
I’m pretty sure it’s an issue with Ubuntu 16.04 and the version (2.3.5) that it installs and Asterisk’s ./configure doesn’t recognize it. Any ideas how to figure this out?

I have proved it on two separate 16.04 servers and neither shows up. But 14.04 and Asterisk 13 does show.

From: asterisk-users-***@lists.digium.com [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Ryan, Travis
Sent: Wednesday, July 19, 2017 3:26 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com>
Subject: Re: [asterisk-users] corosync and Asterisk 13

I have an 14.04 server with Asterisk 13.5 that will recognize it. It has corosync and corosync-dev version 2.3.3 on it.

The one I can’t get to recognize it is 16.04 ubuntu, with corosync and -dev version 2.3.5. Won’t be recognized by ./configure for Asterisk 13.17, 13.16, or Asterisk Certified 13.13.

I REALLY need some help figuring this out. 😊

Thanks!

From: asterisk-users-***@lists.digium.com<mailto:asterisk-users-***@lists.digium.com> [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Ryan, Travis
Sent: Wednesday, July 19, 2017 1:13 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com<mailto:asterisk-***@lists.digium.com>>
Subject: Re: [asterisk-users] corosync and Asterisk 13

Anyone else using corosync with Asterisk 13 and Ubuntu 16.04 or higher?

From: asterisk-users-***@lists.digium.com<mailto:asterisk-users-***@lists.digium.com> [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Ryan, Travis
Sent: Wednesday, July 19, 2017 10:13 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com<mailto:asterisk-***@lists.digium.com>>
Subject: Re: [asterisk-users] corosync and Asterisk 13

yessir

From: asterisk-users-***@lists.digium.com<mailto:asterisk-users-***@lists.digium.com> [mailto:asterisk-users-***@lists.digium.com] On Behalf Of Marcelo Terres
Sent: Wednesday, July 19, 2017 10:05 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-***@lists.digium.com<mailto:asterisk-***@lists.digium.com>>
Subject: Re: [asterisk-users] corosync and Asterisk 13

Did you installed the dev package?
corosync-dev



Marcelo H. Terres <***@gmail.com<mailto:***@gmail.com>>
IM: ***@jabber.mundoopensource.com.br<mailto:***@jabber.mundoopensource.com.br>
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres

On 19 July 2017 at 14:46, Ryan, Travis <***@oscarwinski.com<mailto:***@oscarwinski.com>> wrote:
I want to use corosync and installed it via ubuntu repository. I guess there is a version 1 and 2 of corosync. For some reason ./configure for Asterisk (13) isn’t recognizing I have corosync installed. I can’t enable the res_corosync module in menuselect.

Any ideas?

Thanks!

Travis
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Marcelo Terres
2017-07-20 13:48:38 UTC
Permalink
I tried and face the same problem. I also installed the libcpg-dev but the
problem persists.

I will test it later if I had time.

Regards,

Marcelo H. Terres <***@gmail.com>
IM: ***@jabber.mundoopensource.com.br
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres
Post by Ryan, Travis
I’m pretty sure it’s an issue with Ubuntu 16.04 and the version (2.3.5)
that it installs and Asterisk’s ./configure doesn’t recognize it. Any ideas
how to figure this out?
I have proved it on two separate 16.04 servers and neither shows up. But
14.04 and Asterisk 13 does show.
*Sent:* Wednesday, July 19, 2017 3:26 PM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion <
*Subject:* Re: [asterisk-users] corosync and Asterisk 13
I have an 14.04 server with Asterisk 13.5 that will recognize it. It has
corosync and corosync-dev version 2.3.3 on it.
The one I can’t get to recognize it is 16.04 ubuntu, with corosync and
-dev version 2.3.5. Won’t be recognized by ./configure for Asterisk 13.17,
13.16, or Asterisk Certified 13.13.
I REALLY need some help figuring this out. 😊
Thanks!
Behalf Of *Ryan, Travis
*Sent:* Wednesday, July 19, 2017 1:13 PM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion <
*Subject:* Re: [asterisk-users] corosync and Asterisk 13
Anyone else using corosync with Asterisk 13 and Ubuntu 16.04 or higher?
Behalf Of *Ryan, Travis
*Sent:* Wednesday, July 19, 2017 10:13 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion <
*Subject:* Re: [asterisk-users] corosync and Asterisk 13
yessir
Behalf Of *Marcelo Terres
*Sent:* Wednesday, July 19, 2017 10:05 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion <
*Subject:* Re: [asterisk-users] corosync and Asterisk 13
Did you installed the dev package?
corosync-dev
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres
I want to use corosync and installed it via ubuntu repository. I guess
there is a version 1 and 2 of corosync. For some reason ./configure for
Asterisk (13) isn’t recognizing I have corosync installed. I can’t enable
the res_corosync module in menuselect.
Any ideas?
Thanks!
Travis
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.
org/
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.
org/
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
http://lists.digium.com/mailman/listinfo/asterisk-users
Loading...