[Asterisk-Users] Dialogic D/300JCT-E1 support

[David Zanetti]

Hi all..

Both voip-info.org, Digium's own site, and asterisk.org are a bit light
on the details on support of Dialogic's single E1 span.

Is the single E1 span supported, what channel does it get configured as,
and does anyone have a guide or some experience in getting it function
in *?

Mailing list searches suggest I need to purchase a channel driver from
Digium, but no obvious link to such a driver seems to be on the
website.. Hopefully it doesn't require binary-only kernel code, it could
be a bit painfull.. :|

Thanks :)

[Eric Wieling]

Post by David Zanetti
Hi all..
Both voip-info.org, Digium's own site, and asterisk.org are a bit light
on the details on support of Dialogic's single E1 span.
Is the single E1 span supported, what channel does it get configured as,
and does anyone have a guide or some experience in getting it function
in *?
Mailing list searches suggest I need to purchase a channel driver from
Digium, but no obvious link to such a driver seems to be on the
website.. Hopefully it doesn't require binary-only kernel code, it could
be a bit painfull.. :|

Contact Digium. Almost nobody uses these cards with Asterisk.

[Steven Critchfield]

Post by David Zanetti
Hi all..
Both voip-info.org, Digium's own site, and asterisk.org are a bit light
on the details on support of Dialogic's single E1 span.
Is the single E1 span supported, what channel does it get configured as,
and does anyone have a guide or some experience in getting it function
in *?
Mailing list searches suggest I need to purchase a channel driver from
Digium, but no obvious link to such a driver seems to be on the
website.. Hopefully it doesn't require binary-only kernel code, it could
be a bit painfull.. :|

I think you will be in a binary only kernel module just to use the
dialogic card under linux. You have to contact Digium by phone to see
about purchaseing the channel driver. I don't think it is binary only,
but wouldn't surprise me.

You would do well to ebay the card if you don't otherwise need it and
then buy a Digium card.

[David Zanetti]

Post by Steven Critchfield

Post by David Zanetti
Mailing list searches suggest I need to purchase a channel driver from
Digium, but no obvious link to such a driver seems to be on the
website.. Hopefully it doesn't require binary-only kernel code, it could
be a bit painfull.. :|

I think you will be in a binary only kernel module just to use the
dialogic card under linux. You have to contact Digium by phone to see
about purchaseing the channel driver. I don't think it is binary only,
but wouldn't surprise me.

Right, I shall give them a call then.

Post by Steven Critchfield
You would do well to ebay the card if you don't otherwise need it and
then buy a Digium card.

Alas, the Digium cards (which I have used and are great) do not carry a
TelePermit for New Zealand - it's illegal to connect them to the PSTN
here. Until the Digium cards are made legal, I have to look at
alternatives :(

[Brian West]

Post by Steven Critchfield
You would do well to ebay the card if you don't otherwise need it and
then buy a Digium card.

And you have to sign an NDA to get the drivers for a Dialogic card from
Digium.

bkw

[Donny Kavanagh]

Do the dialogic drivers from digium require those lame redhat 7.2/7.3
only drivers that intel released?

Donny

-----Original Message-----
From: Brian West [mailto:***@bkw.org]
Sent: October 14, 2004 8:19 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Dialogic D/300JCT-E1 support

Post by Steven Critchfield
You would do well to ebay the card if you don't otherwise need it and
then buy a Digium card.

And you have to sign an NDA to get the drivers for a Dialogic card from
Digium.

bkw

_______________________________________________
Asterisk-Users mailing list
Asterisk-***@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[Steven Critchfield]

Post by Donny Kavanagh
Do the dialogic drivers from digium require those lame redhat 7.2/7.3
only drivers that intel released?

Seeings as Digium just wrote a channel driver to connect the hardware
driver to asterisk, I would guestimate that that would be correct to
assume yes. More of the reason that not many people seem to be using the
dialogic cards.

Post by Donny Kavanagh
-----Original Message-----
Sent: October 14, 2004 8:19 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Dialogic D/300JCT-E1 support

Post by Steven Critchfield
You would do well to ebay the card if you don't otherwise need it and
then buy a Digium card.

And you have to sign an NDA to get the drivers for a Dialogic card from
Digium.
bkw
_______________________________________________
Asterisk-Users mailing list
http://lists.digium.com/mailman/listinfo/asterisk-users
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
http://lists.digium.com/mailman/listinfo/asterisk-users
http://lists.digium.com/mailman/listinfo/asterisk-users